CIM Encoder, CIMcoder

This encoder mounts to the nose of a CIM Motor and senses the rotations of the CIM Motor output shaft. A housing, mounted to the CIM Motor, protects the encoder circuitry while a collet spins with the motor output shaft. This version of the CIMCoder features two major changes to the sensor. The most noticeable is the connector is brought to the edge making it easier to plug in cables. The second change is that there are internal pull-up resistors to work with controllers that require them. This encoder works with the NI roboRIO (am-3000), Talon SRX Speed Controller (am-2854), and Sensor Screen (am-3212). The CIMCoder decreases the over CIM shaft length by 0.31".

Encoder Pinout:
Pin 1: VDD
Pin 2: Ch A
Pin 3: GND
Pin 4: Ch B
Features and Benefits
3.3 to 5.0 V supply voltage operation
Designed to mount on CIM motor drive side
Spacer tool for magnet installation
2 channel quadrature output with 20 pulses per channel per revolution for sensing speed and direction.
Magnetic technology offers robust performance
100% Non-Contacting design (no bearings or bushing) provides an extremely long life expectancy
Outputs are logic 0 to 3.3 V
Standard 4 pin Molex connector
Included Hardware:
Encoder
Target Magnet with Set Screw
Centering Agent
Encoder cable, 36" long, with single pin connectors (am-2269)