8 in. Plastic Omni Wheel w/ 3/8 in. Ball Bearings

8" Plastic Omni Wheel with 3/8" Ball Bearings





Included Hardware: Two - 8" Plastic Omni Wheel Webs Eighteen - Black SBR Rollers Eighteen - 1x1/8 Steel Dowel Pins Thirty-Two - Omni-roller Sleeves Six - Individual #10-32 x 1/2" SHCS Six - Individual M5 Nylock Nuts Eighteen - Individual M3 Nylock Nuts Eighteen - Individual M3 x 10mm SHCS Two - 1614ZZ shielded, 3/8" id ABEC3 ball bearings Usage:

With Sprocket : If you wish to drive this wheel with a sprocket, then the sprocket needs to be attached to the side of the wheel, and one ball bearing needs to be pressed into the wheel (on one side). The ball bearing must have a 1.125" od. For a 1/2" id, use am-0030. For a 3/8" id, use am-0573. Use #10-24x3/4 thread forming screws With Bearings : To press beaings into this wheel (for a free spinning wheel or for use with a sprocket), two ball bearings need to be pressed into the wheel (one on each side). The ball bearing must have a 1.125" od. For a 1/2" id, use am-0030. For a 3/8" id, use am-0573. Made in the USA:

Bearings and screws were not made in the USA. All other components were designed, manufactured and assembled in the United States of America.