NeveRest Classic Motor ONLY

This is ONLY the motor that is featured in the NeveRest Classic Series gearmotors. This motor has a helical pinion gear pre-installed that interfaces with all our NeveRest Classic gearboxes. Unless you have a virtually no load situation, like driving a prop, this motor will not help without one of the following gearboxes.



Compatible With Gearboxes:

NeveRest Classic 20 (am-3105)NeveRest Classic 40 (am-3106)NeveRest Classic 60 (am-3107)NOTE:This is notcompatible with the NeveRest Orbital series of gearmotors; the pinion and faceplate are incompatible.



Encoder Cable options:

Encoder cables are not included with this motor, and are sold separately. We have two options:

am-2992 is a cable which has the white 4-pin connector for the encoder and also the black 4-pin connector for the HiTechnic motor controller. am-2993 is a cable which has the white 4-pin connector for the encoder on one end and 4 separate black connectors. Encoder:

The hall effect encoder mounted on the back of this motor provides 28 pulses per revolution (ppr).



Use in a BaneBots Gearbox:This motor can be attached to a BaneBots P60 gearbox. See the downloads tab of this page for the step by step assembly video.